Download "How the Lockheed SR-71 Blackbird Works"
Download this video with UDL Client
install
- Video mp4 HD+ with sound
- Mp3 in the best quality
- Any size files
%3Aformat(webp)%2Fi.ytimg.com%252Fvi%252FgkyVZxtsubM%252Fmaxresdefault.jpg&w=1139&q=75)
Table of contents
Similar videos from our catalog
%3Aformat(webp)%2Fi.ytimg.com%252Fvi%252F1y2PCy7ivjg%252Fhq720_2.jpg%253Fsqp%253D-oaymwE7CK4FEIIDSFryq4qpAy0IARUAAAAAGAAlAADIQj0AgKJD8AEB-AGMAoAC4AOKAgwIABABGHIgSShEMA8%253D%2526rs%253DAOn4CLAu2rb7SN1kOQE7UdAeUk_j6ufT7A&w=1139&q=75)
%3Aformat(webp)%2Fi.ytimg.com%252Fvi%252FLRgFlIpyMQI%252Fmaxresdefault.jpg&w=1139&q=75)
%3Aformat(webp)%2Fi.ytimg.com%252Fvi_webp%252FQ0JALySBSHY%252Fmaxresdefault.webp&w=1139&q=75)
%3Aformat(webp)%2Fi.ytimg.com%252Fvi_webp%252F02gYwJ2G-vE%252Fmaxresdefault.webp&w=1139&q=75)
%3Aformat(webp)%2Fi.ytimg.com%252Fvi%252FCBfGIR0NqCE%252Fmaxresdefault.jpg&w=1139&q=75)
%3Aformat(webp)%2Fi.ytimg.com%252Fvi%252Fc4gBAcwhU9k%252Fmaxresdefault.jpg&w=1139&q=75)
%3Aformat(webp)%2Fi.ytimg.com%252Fvi%252FtO_BiXngGs0%252Fmaxresdefault.jpg&w=1139&q=75)
Video tags
Subtitles
00:00:01
I'm Jake O'Neal, creator of Animagraffs,
And this is the Lockheed SR-71 Blackbird. 00:00:14
The SR-71 entered service in the United
States Air Force in 1966 as a reconnaissance 00:00:21
aircraft, or in other words, a spy plane.
It doesn't carry bombs or have onboard guns. 00:00:31
Its main defense against enemy action is altitude
and speed which made it essentially invulnerable, 00:00:40
sustaining Mach 3.2, that is 3.2 times the
speed of sound which roughly correlates to 00:00:47
about 2,200+ miles per hour (3540.6 km/h),
at altitudes up to 85,000 feet (25,908 m). 00:00:57
No SR-71 was ever shot down. To evade missiles
or hostile aircraft, if they could even reach 00:01:06
the SR-71's altitude, pilots simply outran them.
Every part of this masterpiece is designed for 00:01:17
its mission goals. Let's have a general look
around the plane to get an idea of how those 00:01:22
goals translate into the physical
design of things, before we zoom in 00:01:27
on the finer details of each system.
The Blackbird is a relatively large 00:01:36
airplane compared to other fighter
or reconnaissance craft of the era. 00:01:41
Flying at untouchable altitudes and
speeds simply requires a lot of fuel. 00:01:50
Two-thirds of the fuselage are occupied by
cylindrical fuel tanks, and any usable space 00:01:55
in the wings, for a total capacity of 12,219.2
gallons (46,254.7 L), weighing in at around 00:02:03
80,285 pounds (36416.7 kg) of fuel.
A pair of powerful jet engines are 00:02:12
secured into the wings at both sides.
A substantial portion of this compartment, 00:02:20
called the nacelle, is dedicated to large
movable inlet cones called "spikes" which, 00:02:26
as we'll see later, are critical for the
SR-71's supersonic speed capabilities. 00:02:34
A row of flaps along the back
of the wing, called elevons, 00:02:40
and rudders perched atop each nacelle, make
up the flight control surfaces for the plane. 00:02:51
Heading to the front, there are two cockpits
for the pilot 00:02:57
and Reconnaissance Systems Officer respectively.
Equipment bays surround the cockpits 00:03:05
and can be fitted with an array of
components depending on the mission, 00:03:11
as well as the removable nose section.
Now let's get into the details, 00:03:20
starting with the exterior aerodynamics.
The engines appear to be tilted slightly 00:03:27
downwards on the ground.
At cruising altitude and 00:03:32
speed they're closer to level, with the fuselage
and wing designed to sit at 6 degrees positive 00:03:39
rotation or "angle of attack".
To carry sufficient fuel, equipment, 00:03:46
and personnel, the fuselage and
nose of the plane is quite long. 00:03:53
The Blackbird has a delta wing design,
so called for its triangular shape 00:03:58
like a greek delta character.
Exceeding the speed of sound, 00:04:03
or "going supersonic", as the SR-71 was designed
to do means pushing hard against air molecules. 00:04:11
Air molecules are real physical things,
bonded together in a sort of elastic mesh, 00:04:18
and sound happens when those molecules
ram into each other, to eventually 00:04:23
physically jiggle your ear drum.
The spacing of these molecules, 00:04:30
their individual weight, the strength of
the elastic bonds between them, and so on, 00:04:35
gives this air mesh predictable behavior.
If you slam through these molecules faster 00:04:44
than they can crash into themselves,
you're exceeding the speed of sound.00:04:49
On the ground, this happens at around 760 mph
(1,223 km/h) in relatively normal conditions. 00:04:57
Since they can't move out of the way fast enough, 00:04:59
air molecules bunch up when they hit
parts of the plane that stick out, 00:05:05
forming shock waves that have
predictable characteristics. 00:05:11
Like angles that get sharper with
increasing speed. 18 degrees, to 00:05:16
be precise, at Mach 3.2 cruising speed.
Let's throw a more standard wing into the mix. 00:05:27
Because these wings have
much less sweep back angle, 00:05:31
the nose shock wave blasts into them, causing
a brick wall of drag to slow the plane down.00:05:42
If you try to sweep them back far
enough to tuck into the nose shock wave, 00:05:47
the attachment point at the fuselage gets flimsy.00:05:50
Notice how the delta wing solves these issues.
The classic aerodynamic wing profile shape is 00:06:02
excellent for generating lift at slower speeds.
But as we approach supersonic speed, its thickness 00:06:10
and blunt leading edge cause air to bunch up
in front of the wing in a turbulent traffic jam 00:06:18
Contributing to what's called the "sound barrier".
In contrast, as pressure builds with increasing 00:06:28
speed, the SR-71's sharp, thin
wing slices through the air. 00:06:36
The narrow leading edge allows the
developing shock wave to eventually 00:06:40
attach itself to the front of the wing.
At the speed of sound and above, 00:06:54
the plane's sharp features comb air into
smooth flowing, well behaved supersonic 00:06:59
shock waves at leading and trailing edges
The twin jet engines and their inlets are 00:07:07
spaced out from the center to avoid air
that swirls up from under the fuselage, 00:07:15
but are still kept within the nose
shock wave even at maximum speeds. 00:07:23
As we continue observing the exterior,
we see the characteristic ridges at 00:07:27
each side of the fuselage.
In aerodynamic parlance, 00:07:33
a sharp edge like this is called a chine.
These chines serve a few critical tasks. 00:07:45
They help form more powerful vortices as
air swirls up around them during flight, 00:07:53
which causes lower pressure above
the sharp thin wings, contributing 00:07:57
an impressive 20% of total lift at speed.
They act like fins to stabilize the blackbird's 00:08:06
long nose as it cuts through the air.
These chines also greatly 00:08:15
reduce the radar cross section.
Radar towers beam signals from a point outwards. 00:08:27
Common rounded plane features will
reliably reflect some of those waves 00:08:32
back for easier identification from many angles.
The Blackbird's flatter surfaces reduce the 00:08:47
likelihood of waves reflecting back to the source.
The rudders are also tilted or canted inwards for 00:08:56
the same reason.
Its radar cross 00:09:01
section makes it look much smaller than it is.
The SR-71 was among the first operational aircraft 00:09:11
with this kind of intentional stealth shaping.
The Blackbird also featured an early 00:09:20
radar-absorbing composite material, called
plastic (though not what we think of as plastic). 00:09:29
Composite wedges alternate with
titanium along the outer rim in 00:09:32
a zig-zag pattern to allow for expansion.
This so-called plastic also covers inlet 00:09:41
cones and rudders.
The interior frame, 00:09:48
called the airframe, is mostly made of titanium,
as well as much of the exterior paneling, for its 00:09:56
performance under extreme stress and heat.
Some surfaces could reach 700+ 00:10:02
degrees F (371 C), and the entire plane
expanded several inches when traveling at speed. 00:10:08
Corrugations along the wing surface also
allow expansion while contributing strength.00:10:18
Now that we've seen how the exterior shell and
underlying airframe are made for supersonic 00:10:23
flight, let's see how the engines get us there.
We'll zoom in on just one side. 00:10:34
There's the inlet spike at the
front, which we'll get to in a bit. 00:10:40
The actual jet engine sits behind that,
and has a pretty standard overall design. 00:10:48
Air enters the jet engine and is forced backwards
by rotating discs with blades, called rotors. 00:10:58
Rings of stationary blades called stators make
sure the air flows generally backwards and builds 00:11:04
pressure, instead of just twisting with rotors.
The passage narrows, compressing the air for 00:11:13
more powerful combustion.
The compressed air now flows 00:11:20
through separate nozzles,
around a small outer ring 00:11:34
while fuel is sprayed through the center.
The fuel-air mixture is ignited. In many 00:11:42
jet engines, ignitor plugs, not
unlike a car spark plug, are used.00:11:47
But the SR-71 is different because of its
special fuel that has its own ignition 00:11:52
requirements. We'll look at that a little later.
Once ignited, flame passes through small 00:12:00
"cross-over" tubes until all burner cans are lit.
The powerful exhaust shooting out of these cans 00:12:11
pushes against turbines, delivering
something like 60,000 horsepower 00:12:22
Turbines are connected to
internal gears and shafts 00:12:28
to drive those forward compressor rotors,
sucking in more air and continuing the cycle. 00:12:36
The exiting hot exhaust gas expands, creating a
fast moving jet of air to push the plane forwards. 00:12:46
This setup, with compressor,
combustor, and turbine sections, 00:12:50
is the basic turbojet engine design.
Animagraffs has a video about jet 00:12:57
engines if you want to see how this looks in
a big airliner, or a more modern fighter jet. 00:13:07
High performance engines often have an afterburner
section, and the Blackbird does as well. 00:13:15
Fuel has been consumed, but there's still
burnable air in the exiting exhaust stream. 00:13:23
Additional fuel is sprayed into this stream. 00:13:29
The mixture wraps around V-shaped
rings called flame holders, 00:13:36
which provide a contained area of
turbulence for fuel mixing and combustion. 00:13:44
This mixture is ignited
For most applications, 00:13:49
afterburner is fuel inefficient but very
powerful. As such, it's limited to short bursts. 00:13:57
In contrast, the Blackbird is
designed to maintain continuous, 00:14:02
full afterburner at cruising speed, for an
hour or so at a time between aerial refuelings. 00:14:12
All this heat and built up pressure must
now be converted into exhaust velocity. 00:14:20
There's a special section here
called a converging/diverging nozzle. 00:14:27
Hot, pressurized jet exhaust speeds
up to squeeze through the narrow part, 00:14:35
and then expands through the wide exit,
converting all that heat 00:14:41
and pressure into velocity.
There's a ring of flaps called the "ejector" 00:14:49
that can alter the size of the exhaust opening for
proper exhaust acceleration in varying conditions.00:14:57
There are free-floating ejector flaps that
adjust based on the pressure difference inside vs. outside the exhaust duct
Accelerating exhaust is something 00:15:00
like sticking your thumb over a garden hose.
Water still in the hose moves slowly and pushes 00:15:08
harder against hose walls the more you block
the stream for a stronger spray at the end. 00:15:15
In hard numbers, if air exiting the
turbines is at Mach 0.4, air at the 00:15:21
ejector flaps has accelerated to Mach 3 or
more, to match the plane's traveling speed. 00:15:28
This late 1950's fighter jet technology is
awesome, but it's not capable of sustaining Mach 00:15:34
3.2 on its own. In fact, the jet engine can't even
use supersonic air as it would cause flameouts, 00:15:42
extinguishing the combustor, among other things.
This is where the inlet spike comes into play. 00:15:56
A supersonic shock wave forms at the sharp
tip of the spike, tuning airflow for entry 00:16:04
into the inlet chamber. Some compression is
already happening here, outside of the nacelle. 00:16:13
Just at the inlet lip, another shock wave forms,
bounces or "reflects" a few times, 00:16:26
and eventually reaches the narrowest
part of the inlet passage, where its 00:16:30
supersonic energy is finally converted,
having slowed to subsonic speeds. 00:16:38
The tremendous exchange of energy that happens as
supersonic air trades its velocity for increased 00:16:45
pressure, density and temperature, is key.
You can't use supersonic air in the jet engine, 00:16:54
but you can use the jet engine
like a pump to take in more and 00:16:57
more supersonic air and convert it to pressure.
It's the garden hose in reverse, if the fast water 00:17:06
stream could be crammed back into the hose.
To that end, there's an opening just before 00:17:14
the inlet's narrowest point, to
bleed off some supersonic air. 00:17:23
It flows through shock traps
to slow and pressurize. 00:17:30
It surrounds and cools the engine,
and eventually rejoins the exhaust stream, 00:17:41
where it trades pressure for
velocity on its way out the back. 00:17:48
This process is so important that at Mach
3.2 cruise, just the pressure recovery 00:17:54
alone from the inlet spike and bypass air is
responsible for an incredible 58% of thrust. 00:18:04
This clever trick is also possible because there's
less air pressure at 80,000 feet, so you don't 00:18:10
need to hold or build up as much pressure inside
the engine to release a super fast exhaust jet. 00:18:18
At sea level the air is much thicker. Imagine
that same garden hose, but spraying underwater. 00:18:29
The spike is adjustable.
With this much thrust coming from the 00:18:35
inlet spike at such high speeds, it's critical
that shock waves maintain proper alignment. 00:18:44
At Mach 1.6 the spike begins to
retract and continues moving backwards, 00:18:52
to 26 inches (66 cm) of rearward travel
at its limit as speed hits Mach 3.2, 00:18:58
the Blackbird's designed cruising speed. The
inlet throat's shape changes as the spike moves. 00:19:08
At cruise, the spike shock wave
sits right at the inlet lip. 00:19:15
Again, keeping this pre-designed
shock wave pattern is crucial. 00:19:21
For example, say some kind of internal
error causes pressure build up at the 00:19:25
mouth of the jet engine, pushing
shock waves out of alignment. 00:19:31
All that thrust is immediately lost, and
the plane jerks abruptly to one side, 00:19:36
slamming pilots helmets against cockpit windows.
This is called an inlet unstart. Unstarts were 00:19:44
harrowing experiences for SR-71 pilots. With up
to 70% of total thrust disappearing in an instant. 00:19:54
If an unstart is detected, the onboard
computer moves the spike forward in an 00:19:59
attempt to restart it.
So that's it. You've got 00:20:07
the famed J58 jet engines for getting the
Blackbird off the ground and up to speed, 00:20:15
and the inlet spikes for comfortable
cruise well into the supersonic realm. 00:20:23
This system is so good at capturing the energy in
supersonic airflow that the Blackbird was known to 00:20:29
get better fuel mileage the faster it went.
Now, let's examine a few other components 00:20:41
at the engine that help keep airflow
in check at key points in the system. 00:20:47
There are computer controlled cowl bleed vents
to let off excess air from the inlet throat.00:20:49
There are computer controlled forward
bypass doors to let off excess air, 00:20:52
and keep inlet air pressure balanced
However, this slow air rejoining the 00:20:58
outside flow could cause drag.
So, there's another set of bypass 00:21:03
doors just before the engine that the pilot
can manually control, which bleed air into 00:21:08
the nacelle bypass chamber instead.
Below Mach 0.5 there may not be 00:21:16
enough airflow yet for proper cooling.
There are suck-in doors about halfway down 00:21:22
the nacelle that open to help out.
There's a set of flaps at the back 00:21:30
of the jet engine to independently
control afterburner exhaust pressure,00:21:37
and a ring of blow-in doors
to help keep the ejector area 00:21:43
full at lower speeds and avoid dead
spots, which cause drag in the system. 00:21:52
Above Mach 2.2, there are six bypass tubes
that open to divert air from the jet engine's 00:22:00
compressor section directly to the afterburner,
relieving internal engine pressure and boosting 00:22:07
afterburner performance. Up to 40% of the engine
intake volume can be bypassed in this way, 00:22:14
for a significant thrust increase.
The inlet spike has rows of small holes 00:22:28
and interior passages that take
in cooling air at low speed. 00:22:37
At higher speeds, a thin layer of air builds
up around surfaces, called the boundary layer. 00:22:45
Boundary layers can do weird things as
the air sticks to and follows the surface. 00:22:52
At curves, air might separate and clog up the
flow, causing unwanted turbulence downstream. 00:23:01
These holes bleed off boundary
air to keep flow running smoothly. 00:23:12
For weight reduction, there's
no starter on the airplane. 00:23:18
Start carts were used, with two muscle-car engines 00:23:21
placed side by side, without
mufflers, running full blast.00:23:26
Crew were said to enjoy the start
process for its impressive spectacle. 00:23:33
A shaft with gears extends up and connects with
a gearbox at the underside of the jet engine, 00:23:39
to get everything spinning and
start the combustion process. 00:23:48
Now let's move away from the engines,
for a look at the fuel system. 00:23:54
As shown in the intro, fuel tanks
make up a large portion of the plane. 00:24:01
At takeoff, fuel flow rate could reach
74,000 lbs. per hour for a single engine. 00:24:07
That's about 3 gallons of fuel per second,
or 10,800 (40,882 L) gallons per hour.00:24:13
At Mach 3.15, fuel flow is more efficient, at a
little under 3,000 (11,356 L) gallons per hour.00:24:23
The tank is incorporated into the wing structure
without any additional bladder or barrier. 00:24:33
Since panels were designed to expand, panel gaps
meant fuel would leak from the plane when cold. 00:24:43
Maintenance personnel had charts for allowable
drips per hour, and when that rate was exceeded, 00:24:49
the plane's panels had to have sealant reapplied.
Surfaces got so hot that normal fuel couldn't be 00:24:58
used for risk of auto-ignition
from surface heat alone. 00:25:03
A special fuel called JP-7
was developed which wouldn't 00:25:07
spontaneously ignite below 466 degrees F (241 °C)
To ignite this fuel, a special chemical was 00:25:18
required, called triethylborane or TEB for short.
TEB, in contrast, ignites on contact 00:25:27
with air alone.
A shot of TEB was 00:25:32
injected first to get the JP-7 fuel burning, which
produced the famous green starting flame blast. 00:25:42
Additives in the fuel made it useful as a
lubricant, coolant, and hydraulic fluid. It 00:25:48
took on any of these roles throughout the plane,
especially in the engine's mechanical components. 00:25:58
The SR-71 had to refuel shortly after takeoff
because the very heavy full fuel load would 00:26:03
stress the plane's landing gear and require too
much runway for liftoff, among other limitations.00:26:09
Fueling normally happens at about 25,000
feet (7,620 m), where the plane takes on 00:26:14
an additional 60,000 lbs. (27,216 kg) of fuel.
There are nitrogen containers in the front landing 00:26:23
gear compartment to inert fuel tanks –
meaning air is allowed to vent out 00:26:31
as nitrogen is pumped in.
With no oxygen near the fuel, 00:26:36
it's considered inert, or chemically inactive,
greatly reducing explosion risk in conditions 00:26:42
of extreme pressure and heat.
Flight Control Surfaces 00:26:52
Flight control surfaces are parts
of an airplane's body that influence 00:26:55
airflow to change the plane's attitude.
For example, a fairly standard airplane 00:27:07
has ailerons at each wingtip
that move opposite one another to roll the plane. 00:27:17
Moving elevators at the tail affects pitch,
and the rudder controls yaw, or rotation 00:27:25
about the airplane's vertical axis.
The SR-71 has large dual rudders, 00:27:34
one above each engine.
The delta wing combines 00:27:40
ailerons with elevators into a single
row of flaps that handles both tasks. 00:27:47
These are called elevons.
Each side moves as a single unit. 00:27:57
Opposite one another for roll,
and together for pitch – 00:28:07
or some blended combination of both for maneuvers
that require some roll and pitch at the same time. 00:28:15
To achieve this blended, mixed
output, there's a mechanical 00:28:19
device in the center tail section called a mixer.
Cables from the flight stick in the cockpit pass 00:28:28
through pulleys and tubes to arrive at the mixer.
There are separate down and back cable runs 00:28:37
for stick side-to-side or roll,
and stick front-to-back, or pitch. 00:28:51
At the mixer, pitch cables
connect to the pitch quadrant, 00:28:56
which is a partial wheel with
channels and attach points. 00:29:02
Roll cables attach to the
roll quadrant behind that. 00:29:09
There's a mixed output bellcrank at the front
with push rods that link to the elevons at 00:29:18
either side.
Roll input 00:29:23
moves the entire bellcrank left or right.
Because linkages are mirrored side to side, this 00:29:30
ends up rotating elevons in opposite directions.
Pitch input rotates the bellcrank itself, 00:29:40
which tilts elevons the same way on both sides.
When pitch and roll commands happen together, 00:29:51
the bell crank gracefully blends these
commands for a singular output to each side. 00:30:00
This beautiful mechanical
device is worth a closer look. 00:30:07
Take the roll components, for example.
There's a feel spring that compresses to 00:30:14
give the pilot felt feedback in the stick
for the position of parts in the system, 00:30:20
because, as we'll see in a minute, the elevons
themselves are hydraulically controlled. 00:30:25
There's no direct mechanical connection.
Moving down the chain, there's a trim actuator. 00:30:35
Trim adds more permanent adjustment to the
system so the pilot doesn't have to hold the 00:30:39
stick in one place for long periods of time,
for example to fight a continuous side wind. 00:30:48
The system still allows moment to
moment input on top of the trim setting. 00:30:58
The pilot controls the trim
level from the cockpit. 00:31:05
Pitch components also have these parts.
The pitch feel spring is 00:31:11
at the bottom of the mixer.
The pitch trim actuator is at the back. 00:31:21
Now watch, as the bell crank executes
blended roll and pitch commands, 00:31:26
with accompanying trim settings.
Also connected to the pitch system, 00:31:37
there's a stick pusher.
With its own computer controlled actuator. 00:31:45
The stick pusher can shake the stick as a warning,
or automatically push the stick forward 00:31:52
to avoid or counter a stall.
Stalls can happen, for example, 00:31:57
if the plane exceeds certain flight
angle limits, interrupting lift and 00:32:02
causing the plane to fall through the air.
From the mixer, rods at each side translate 00:32:18
movements to individual servo units.
The servo converts this physical movement 00:32:26
into hydraulic pressure to regulate
rows of actuators at each elevon. 00:32:32
It has a sensing rod to monitor elevon position.
From this inboard servo, a train of rods and 00:32:40
linkages continues to an outboard servo
which controls another set of actuators. 00:32:52
There's a separate set of cables, pulleys,
and hydraulic components for each rudder. 00:33:00
A rotating post with an attached actuator extends
from the rudder stub into the rudder frame. 00:33:11
Landing gear
There's a single 00:33:14
steerable nose wheel at the front,
and twin gear at the back. 00:33:26
The peculiar light grey rear tires are made of
rubber infused with aluminum powder for a much 00:33:32
higher flash point, that is, the temperature
at which they could catch fire. They're 00:33:38
pressurized to an unbelievable 400psi – your
average car tire sits at around 30 to 35 psi. 00:33:47
They're also inflated with nitrogen
instead of oxygen for fire resistance. 00:33:57
The Blackbird's aerodynamic qualities
mean higher landing speeds overall. 00:34:04
To further slow the plane down and take stress
off the wheels, there's a 40 ft. (12 m) diameter 00:34:09
drag chute which is deployed at main gear
touchdown, at about 150 knots airspeed. 00:34:20
Now, let's head to the front of the plane for
a look inside the Blackbird's dual cockpit(s). 00:34:27
The pilot sits in the forward cockpit
to fly the plane among other duties, 00:34:34
with the Reconnaissance Systems Officer (RSO) in
the rear cockpit to run onboard equipment, and 00:34:41
direct navigation along the mission flight path.
Moving to the pilot's position, let's get into 00:34:49
the instruments and controls.
Front and center, there's a 00:34:55
grouping of main flight instruments.
The attitude indicator shows the plane's 00:35:01
position relative to the horizon,
with a backup attitude 00:35:06
indicator nearby for redundancy.
Below that, the HSI or Horizontal 00:35:13
Situation Indicator, shows the plane's position
relative to a heading or preset point in space, 00:35:20
and the plane's relationship to the imaginary line
from one heading to the next, including remaining 00:35:25
distance, side-to-side deviation, and so on.
Below that, a map projector, which ran on 16mm 00:35:34
film, and contains the entire flight route.
There are a few instruments here which are 00:35:42
standard to most airplanes.
The altimeter for altitude, 00:35:49
airspeed for general forward speed in knots,
and vertical air speed for how fast the 00:35:56
plane is moving up or down.
At supersonic speeds and very 00:36:02
high altitudes, outside air conditions, and
supersonic airflow around the plane's exterior 00:36:08
components affects instrument accuracy.
As such, SR-71 pilots relied on the triple 00:36:15
display indicator at speed.
There's the KEAS indicator 00:36:20
at the top for knots equivalent airspeed,
which takes into account air compressibility 00:36:26
at high altitude for an adjusted speed
calculation. For reference, there could be 00:36:32
up to 100 knots difference between the normal
airspeed indicator and this adjusted reading. 00:36:38
Altitude is beneath that,
and Mach at the bottom. 00:36:47
Down and to the right, there are fuel flow
gauges measured in thousands of pounds per hour.00:36:54
Oil pressure gauges are nearby.
There are gauges for hydraulic 00:36:58
pressure in various systems.
Above that, a grouping of 00:37:03
instruments related to exhaust, including
exhaust nozzle position indicators 00:37:08
and exhaust temperature.
Normal running temperature is 00:37:12
800 degrees Fahrenheit (426.6 C), and can be
manually adjusted or "trimmed" by the pilot. 00:37:18
There are fire warning lights nearby,
and tachometers to measure engine rotation speed.00:37:26
Idle is about 3900 RPM, while cruise
is around 7,100 RPM. That's not much 00:37:33
difference in engine rotation speed for all
the action happening in that part of the plane. 00:37:40
There's an elapsed time gauge which is a sort of 00:37:43
stopwatch used, for example, in monitoring
expected travel time between points. Rarely 00:37:44
used, but a government requirement.
Moving leftward, there's the angle 00:37:49
of attack indicator to track the plane's
angle relative to its direction of travel.00:37:55
You'll recall from earlier, the
plane is designed to sit at about 00:37:58
6 degrees angle of attack at cruise.
There are gauges, switches, 00:38:04
and lights related to the previously
shown inlets, spikes, and engines.00:38:08
For most of the flight, the inlets are
automatically controlled by onboard computers, 00:38:14
but the pilot can take manual control if needed.
There are left and right 00:38:19
inlet unstart warning lights,
with restart switches at the bottom left. 00:38:27
There's a spike position gauge, with
two indicators, one for each side. 00:38:32
and position switches.
Compressor inlet temperature, 00:38:39
and pressure gauges to monitor conditions at the
compressor face or front of the J58 jet engine. 00:38:47
with a pair of switches for air
bypass control in this area. 00:38:52
There's a stick pusher/shaker
switch to the left. When turned on, 00:38:56
the stick will shake if the pilot is approaching
angle of attack limits, and forcefully push the 00:39:02
stick forward if the pilot ignores the shaking.
The RSO bailout switch is used to request bailout, 00:39:10
since the RSO (the backseat officer) should go
first in emergency bailout conditions, to avoid 00:39:16
safety concerns with opening canopies and so on.
The RSO ejected light indicates if the RSO has 00:39:24
actually ejected. These are also
failsafes if the communication 00:39:28
system between officers isn't working.
The drag chute pull handle is up and to the left. 00:39:36
At the bottom, there are indicator gauges
for pitch, roll, and yaw trim levels. 00:39:43
The roll trim switch is at
the left side of the cockpit. 00:39:52
A combined pitch and yaw trim switch
is located on the flight stick, 00:40:00
with left-to-right for yaw
and up-and-down for pitch. 00:40:06
While we're at the stick, let's
review other controls here. 00:40:11
There's a button to switch the pilot's microphone
between internal or external communication. 00:40:17
The dual purpose button to the right either
activates control stick command so the pilot 00:40:22
can use the stick during autopilot, or it can
activate nosewheel steering when on the ground. 00:40:31
A button towards the front turns
on the rain removal system. 00:40:36
And a multi-purpose trigger at
the front can control things like 00:40:39
disconnecting air refueling components,
interrupting pitch or yaw trim, and more. 00:40:50
While in flight, the rudder pedals
at each side control rudder angle 00:40:53
when pressed inwards from the bottom.
Moving feet up to rotate the pedals controls 00:41:00
wheel braking for each side while on the ground.
Moving now to the right or starboard side of the 00:41:09
cockpit, there are instruments
related to fuel management. 00:41:14
Balancing the massive fuel load front to back
greatly affects performance, since the plane, 00:41:20
again, is designed to sit at a particular angle.
There's the main fuel level gauge in pounds. 00:41:29
Beneath that, the center of gravity
indicator. The fuel system draws from 00:41:34
forward tanks and works backwards, so the center
of gravity will move aft as fuel is consumed.00:41:41
At speed, this center of gravity
has shifted 25% towards the back. 00:41:48
There's a fuel forward transfer switch that moves
fuel back into forward tanks when switched on. 00:41:55
And a corresponding fuel aft
transfer switch, which moves 00:41:58
fuel rearward, and must be held down to operate.
There's a fuel tank pressure gauge at the bottom, 00:42:07
and gauges to measure nitrogen quantity in
various tanks, which is used for inerting, 00:42:12
as we saw in the fuel system explanation.
There's a fuel dump switch to quickly dump 00:42:18
thousands of pounds of fuel, for example
to drop weight in an emergency situation. 00:42:25
Emergency fuel shutoff switches are nearby. 00:42:31
Now let's head over to the left
or port side of the cockpit. 00:42:36
There's a grouping of dials for environmental
controls, such as cockpit temperature, 00:42:41
face heat and suit heat, which control
heating in the pilot's helmet and suit, 00:42:47
and a nearby temperature gauge with a switch
to select which system it should display.00:42:56
For equipment survival, cockpit temps
shouldn't exceed 140 deg. F (60 C). Which I'm sure the crew would appreciate as well.
Near the bottom there's a cabin altitude gauge. 00:43:01
Crew could choose cabin pressurization equivalent
to 10,000 or 26,000 ft. (3048 - 7924.8 m) 00:43:08
And a liquid oxygen level indicator beneath.
Liquid oxygen is converted to gas and pumped 00:43:14
into crew's helmets for breathing.
The landing gear lever is nearby, with 00:43:19
associated indicator lights, switches, and so on.
As we pivot all the way to the left side wall, 00:43:28
we see the dual throttle levers.
There's a button here to toggle 00:43:33
the pilot's microphone.
And a switch beneath that to 00:43:37
manually initiate the inlet spike restart sequence
Each throttle channel has a TEB counter to track 00:43:46
how many shots of TEB are used, from
a starting total of 16 shots per side. 00:43:53
For example, the throttles move forward up to a
limit which corresponds to normal engine power. 00:44:01
The pilot must lift throttles up over
this detent to engage afterburners. 00:44:08
Doing so fires a shot of TEB
to start the afterburners, 00:44:12
and the counters tick down each time this happens.
Afterburner power is controllable from min to max 00:44:19
along the stick travel.
There's an oxygen 00:44:25
settings control panel behind that.
A nearby pull handle will jettison the canopy. 00:44:33
Other panels here include a radio panel,
standby oxygen panel, 00:44:39
a panel for various lights such
as landing gear lights and more. 00:44:44
Controls for the map projector are found
towards the front of this panel area. 00:44:49
Corresponding banks of
controls on the starboard side 00:44:53
handle things like internal comms system,
computer navigation aids for flying, 00:44:59
landing and takeoff, autopilot, and more.
The rear cockpit echoes many of the same gauges, 00:45:10
switches, and indicators,
with some crucial additions. 00:45:17
There's a view sight monitor which lets
the RSO see directly beneath the plane, 00:45:21
with magnification settings, and more.
A radar display sits beneath that, 00:45:29
and a large map projector pane.
There's a control panel for the astroinertial 00:45:36
navigation device, which we'll cover in a bit.
There's a panel with controls and 00:45:42
indicators for reconnaissance equipment.
Controls at the left side include a DEF panel 00:45:50
to engage onboard defensive systems, which could
counter any threats to the plane, from things like 00:45:56
surface to air missiles, air to air missiles,
hostile fighter intercept attempts, and so on. 00:46:02
There are also radio and
intercom controls in this area. 00:46:08
As we move away from the controls, we can
take in other items in these cockpits. 00:46:14
The RSO has retractable sun shades.
The pilot has a positionable sun visor with 00:46:24
wings. Sun glare at altitude could make instrument
visibility almost impossible if not blocked. 00:46:33
Both cockpits have small mirrors to help crew see
themselves, due to the difficulty of some actions 00:46:39
in their bulky flight suits in confined quarters.
The pilot has a retractable periscope to view 00:46:47
the plane looking aft for things like
engine fires, contrailing, fuel dumping, 00:46:53
and to check rudder position.
Windows have inner and outer 00:47:01
panes with an air gap.
Glass at the outside reached 00:47:05
temperatures of 400-500 degrees Fahrenheit
(204 - 260 C) at cruise, with the interior 00:47:10
pane's surface in the 250 degree (121 C) range.
The cockpit had to have air pumped in at -40 to 00:47:20
keep interior temps at a comfortable 60
degrees (15.5 C) for crew, who wore their 00:47:25
own climate controlled flight suits.
The suits themselves have various 00:47:32
critical layers, starting with a thin
nylon comfort layer against the skin, 00:47:40
followed by an inflatable rubber bladder layer
for added warmth against cold air or water in the 00:47:45
event of emergency exit from the cockpit.
A fishnet type layer helps the suit keep 00:47:53
its proper shape when inflated,
and the iconic orange outer layer 00:48:00
which is fire resistant up to 800 F (426.7 C).
There are metal rings for glove and helmet 00:48:08
attach points.
There are 00:48:12
connections for climate and breathing air.
There are easily accessible leg zipper pockets, 00:48:24
and velcro pads just above knees
for sticking important documents. 00:48:31
The helmet has a face shield with a sun visor,
and a feeding port for squeezing 00:48:39
food out of tubes.
There's a neoprene seal 00:48:44
around the face to allow pressurization to sea
level for comfortable breathing, where the rest 00:48:50
of the suit matched cockpit pressure levels.
The seat has a parachute in the head rest, 00:49:00
and is anchored to a support rack upon
which it slides during the ejection process. 00:49:08
There are cables at the bottom for attachment
to metal brackets at the heel of each boot. 00:49:18
These cables pull the pilot's feet tight to the
seat frame during ejection to avoid striking limbs 00:49:25
as the seat blasts out of the cockpit.
Equipment 00:49:35
The nose and side bays at the front of the
plane have components for both airplane 00:49:40
functionality and mission-specific objectives.
I'll show you the zoomed in individual units, 00:49:49
and then we'll zoom out so you can see
their range and capabilities from 80,000 00:49:54
ft (24,384 m) down to the earth's surface.
The pitot mast is a thin tube with various 00:50:02
probes which feeds air pressure data to
onboard computers and instruments for things 00:50:08
like airspeed, angle of attack, and more.
The entire nose is interchangeable and can 00:50:18
be swapped out between flights
to suit mission objectives. 00:50:24
There are three noses, two with
different radar types, and an 00:50:28
optical bar camera which I've featured here.
The optical bar camera had film reels that carried 00:50:36
10,500 ft (3,200 m) of 5-inch (12.7 cm) wide
film. For comparison, a normal 90 minute movie 00:50:43
would use 8,100 feet (2,468.8 m) of 35mm film
(~1.38 in). It could also film in stereo vision 00:50:50
to help identify objectives easier.
Moving aft, there are liquid 00:50:58
oxygen supply bottles.
There are bays which house 00:51:04
components for the SR-71's defensive systems.
Further aft, there's a bay with radar recording 00:51:12
equipment. The Blackbird's unusual speed
and altitude tended to activate hostile 00:51:18
radar and missile systems along its flight path.
These signals could be captured and analyzed to 00:51:24
better understand their capabilities.
The bays behind that hold technical 00:51:31
objective cameras for more detailed
photography of smaller, specific areas. 00:51:39
Just behind the rear cockpit, there's the
Astro Inertial Navigation System (ANS) 00:51:45
to precisely monitor airplane location.
It would track three star groups within 00:51:54
30 seconds after leaving the hangar, no matter
the time of day. The SR-71's location could be 00:52:01
pinpointed to within 300 feet (91 m) anywhere
in the world, even at Mach speeds. This was 00:52:08
well before the existence of GPS satellites.
Also in these bays and compartments there are 00:52:18
batteries, radio equipment, antennas,
and computers that run or assist 00:52:22
other components related to mission
goals, airplane function, and more. 00:52:33
And here's a zoomed out diagram to
show you what each component sees. 00:52:40
The optical bar camera can continuously
photograph an 82 mile (131 km) wide by 2.3 00:52:46
miles (3.7 km) long patch.
Radar can monitor an 00:52:51
11 mile (17.7 km) area from 23 to 115
miles (37 - 185 km) from the flight path. 00:53:00
Signal (radar etc.) recorders
can see from horizon to horizon. 00:53:07
Technical objective cameras locate and
photograph hundreds of targets to within 00:53:11
6 inches (15 cm) of resolution within
a 16 mile range (26 km) side to side. 00:53:24
Perhaps what makes the SR-71 so special is
its rarity. To have the right people and 00:53:34
talents come together, with proper funding,
and be allowed to flex their talents fully 00:53:40
is apparently a very rare thing indeed,
and often results in legends that persist.00:54:22
Hey everyone, Jake here, creator of
Animagraffs. First of all thanks for 00:54:27
being on the channel and enjoying my work!
This project was AWESOME to create and I'm 00:54:33
going to be releasing a behind the scenes
video shortly after the release of this one, 00:54:38
detailing everything that went into making this
project. From the research that I had to find and 00:54:45
dig deep to get, to crafting the model, and doing
the materials, and rendering, and the rigs -- so, 00:54:52
building the moving mechanical objects. The items
in these projects, many of them actually work 00:54:59
how they would in real life! These are real
recreations and I want to show you how I do 00:55:03
it and bring you into the magic and The Madness
of making Animagraffs. I'll be entertaining and 00:55:08
I might even tell a few light jokes here and
there so something to look forward to. Anyway00:55:15
[Music]00:55:20
Later!Description:
An intensive and thrilling look inside the SR-71 Blackbird, one of aviation's absolute greatest legends. Special thanks to Air Zoo Aerospace & Science Museum (youtube.com/AirZoo), retired SR-71 Pilots Jerry Glasser and Buz Carpenter, and Arnie Gunderson (retired Pratt & Whitney J58 PM). CREDITS Jacob O'Neal - Research, script, narration, 3D modeling / animation, music BEHIND THE SCENES If you'd like to see how I made this video. I show my research sources, pdfs, images, etc., and also the model creation process, animating, rendering, and more: https://www.youtube.com/watch?v=hP7CDg0id4I MUSIC I composed the background music specifically for this project. Listen to "Blackbird" on my soundcloud: https://soundcloud.com/jakeoneal/blackbird PATREON https://www.patreon.com/animagraffs SOFTWARE USED I use Blender 3D to create these models. It's free and open source, and the community is amazing: https://www.blender.org/ 0:00 Intro 03:18 Aerodynamics of supersonic flight 08:13 Radar cross section 10:18 J58 Jet Engines 15:49 Inlet spike 20:39 Engine supporting features 23:12 Start carts 23:48 Fuel system 26:48 Flight control surfaces 33:11 Landing gear 34:20 Cockpits 34:47 Front cockpit 45:07 Rear cockpit 46:08 Cockpits (cont'd) 47:15 Flight suit 49:32 Reconnaissance equipment 53:20 Hero shot 54:11 Credits 54:22 Epilogue
Mediafile available in formats
* — If the video is playing in a new tab, go to it, then right-click on the video and select "Save video as..."
** — Link intended for online playback in specialized players
Questions about downloading video
How can I download "How the Lockheed SR-71 Blackbird Works" video?
http://unidownloader.ru/ website is the best way to download a video or a separate audio track if you want to do without installing programs and extensions.
The UDL Helper extension is a convenient button that is seamlessly integrated into YouTube, Instagram and OK.ru sites for fast content download.
UDL Client program (for Windows) is the most powerful solution that supports more than 900 websites, social networks and video hosting sites, as well as any video quality that is available in the source.
UDL Lite is a really convenient way to access a website from your mobile device. With its help, you can easily download videos directly to your smartphone.
Which format of "How the Lockheed SR-71 Blackbird Works" video should I choose?
The best quality formats are FullHD (1080p), 2K (1440p), 4K (2160p) and 8K (4320p). The higher the resolution of your screen, the higher the video quality should be. However, there are other factors to consider: download speed, amount of free space, and device performance during playback.
Why does my computer freeze when loading a "How the Lockheed SR-71 Blackbird Works" video?
The browser/computer should not freeze completely! If this happens, please report it with a link to the video. Sometimes videos cannot be downloaded directly in a suitable format, so we have added the ability to convert the file to the desired format. In some cases, this process may actively use computer resources.
How can I download "How the Lockheed SR-71 Blackbird Works" video to my phone?
You can download a video to your smartphone using the website or the PWA application UDL Lite. It is also possible to send a download link via QR code using the UDL Helper extension.
How can I download an audio track (music) to MP3 "How the Lockheed SR-71 Blackbird Works"?
The most convenient way is to use the UDL Client program, which supports converting video to MP3 format. In some cases, MP3 can also be downloaded through the UDL Helper extension.
How can I save a frame from a video "How the Lockheed SR-71 Blackbird Works"?
This feature is available in the UDL Helper extension. Make sure that "Show the video snapshot button" is checked in the settings. A camera icon should appear in the lower right corner of the player to the left of the "Settings" icon. When you click on it, the current frame from the video will be saved to your computer in JPEG format.
How do I play and download streaming video?
- in video formats, hover your mouse over "Streaming Video**";
- right-click on "Copy link";
- open VLC-player;
- select Media - Open Network Stream - Network in the menu;
- paste the copied link into the input field;
- click "Play".
- copy the video address (URL);
- select "Open Network Stream" in the "Media" item of VLC player and paste the link to the video into the input field;
- click on the arrow on the "Play" button and select "Convert" in the list;
- select "Video - H.264 + MP3 (MP4)" in the "Profile" line;
- click the "Browse" button to select a folder to save the converted video and click the "Start" button;
- conversion speed depends on the resolution and duration of the video.
For this purpose you need VLC-player, which can be downloaded for free from the official website https://www.videolan.org/vlc/.
How to play streaming video through VLC player:
To download streaming video via VLC player, you need to convert it:
Warning: this download method no longer works with most YouTube videos.
What's the price of all this stuff?
It costs nothing. Our services are absolutely free for all users. There are no PRO subscriptions, no restrictions on the number or maximum length of downloaded videos.